中文版
中文版
 English
English
Location:Products > Networking > Industrial Ethernet > Industrial Managed PoE Switch
Networking
SFP Transceiver
Video Transmission
Other Accessories

Industrial 8-port 10/100/1000T 802.3at PoE + 4-port 10G SFP Managed Ethernet Switch

Model:LNK-GYM4012GXP-SFP Series

►   L2+ features provide better manageability, security, QoS, and performance.

►   8*10/100/1000M Base-TX RJ45 Ports+4*10G(support1.25/2.5/5G)SFP+ Ports. All ports support line-speed forwarding mode

►   Support management through WEB, CLI,TELNET, SSH, SNMP

Overview

LNK-GYM408GXP-SFP (8G + 4SFP) is the next generation L2+ managed POE+ switch from, features with powerful web management function. Fan-less & low consumption design. Supporting Looped Network Redundancy. (Self-healing time <20ms, with complete security and QoS policy, support VLAN division, port mirroring, port speed limit. Support broadcast storm suppression & flow control. Managed through a variety of interfaces and ways including the WEB, CLI and SNMP etc.

With the wide working temperature and anti-surge protection in all ports, it is widely used in rail traffic, electricity, water conservancy, petrochemical, industrial control, electric alarm bayonet and other harsh environment, stability required strictly industry or place.

Features

►   L2+ features provide better manageability, security, QoS, and performance.

►   8*10/100/1000M Base-TX RJ45 Ports+4*10G(support1.25/2.5/5G)SFP+ Ports. All ports support line-speed forwarding mode

►   Support L2+ Switching features including 802.1Q VLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.

►   Support spanning tree STP(802.1D) and RSTP(802.1W).

►   Jumbo frames support up to 9.6K kilobtyes.

►   Support enhanced management through WEB, CLI,TELNET, SSH, SNMP.

►   IEEE 802.3af and 802.3at. Supports per port PoE configuration function

Technical Indexes

Product Name

8-Port 10/100/1000Base-T + 4-Port 10G SFP+ L2 Plus Industrial Managed POE Switch

Product Model

LNK-GYM408GXP-SFP

Connector Type

8x 10/100/1000Base-T ports + 4x 10G(1.25/2.5/5G)SFP slots + 1 Console port

Network Media

10BASE-T: Cat3/ 4/ 5 UTP (≤100m)

100BASE-TX: Cat5 or more UTP (≤100m)

1000BASE-TX: Cat5 or more UTP (≤100m)

Switching capacity

Capacity in Millions of Packets per Second (mpps) (64-byte packets)130.94

Bandwidth

368Gbps

Layer2 Switching 

 

Spanning Tree Protocol (STP)

Standard Spanning Tree 802.1d

Rapid Spanning Tree (RSTP) 802.1w

G.8032 ERPS

<50ms ring protection for industrial high reliable application

Aggregation

Link Aggregation Control Protocol (LACP) IEEE 802.3ad

Up to 8 groups

Up to 16 ports per group

VLAN

Support up to4KVLANs simultaneously (out of 4096 VLAN IDs)

Port-based VLAN

802.1Q tag-based VLAN

DHCP Snooping (Layer 2)

Prevent unauthorized configuration and use of IP addresses, while providing support for IP Source Guard and ARP detection

IGMP v1/v2 snooping

IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1024 multicast groups (source-specific multicasting isnotsupported)

Security

 

Secure Shell (SSH) Protocol

SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported

Secure Sockets Layer (SSL), HTTPS

SSLencrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch

Port Security

Locks MAC Addresses to ports, and limits the number of learned MAC addresses

IP Source Guard

Prevents datagram with spoofed addresses from being in the network

Storm control

Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port

ACLs

Support for up to256entries; Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag

Quality of Service

 

Hardware

Support8hardware queues

Scheduling

8 COS queues per port support strict priority and weighted round-robin (WRR)

Classification

Port based; 802.1p(PCP) VLAN priority based;

Rate Limiting

Ingress policer;egress shaping and rate control;per VLAN,per port and flow based

Management      (Web/ SSL, Telnet/ SSH, ping, Trivial File Transfer Protocol (TFTP), SNMP, Syslog)

Web GUI interface

Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring

Dual Image

Dual image provides independent primary and secondary OS files for backup while upgrading

Firmware upgrade

Web browser upgrade (HTTP/ HTTPs) and TFTP;Upgrade through console port as well

Port mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up toN-1 (N is Switch’s Ports)ports can be mirrored to single destination port. A single session is supported. 

Other management

Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support)

Green Ethernet

 

Link detection

Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on

Gigabit Ethernet RJ-45 port when detecting link down or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up

Cable length detection

Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter.

Jumbo frames

Frame sizes up to 9KB supported on Gigabit interfaces

MAC Table

Up to16K MAC addresses.

Link Layer Discovery Protocol (LLDP)

Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet. 

PoE

 

PoE Standard:

PoE Port Power:30W per PoE port by default, can be customized by Web management software

PoE Ports:

PoE Ports: End-span (Mid-span optional)

Minimum Requirements

Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet Explorer version 6 or later;

Category 5 Ethernet network cable;

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in network

Dimensions

165*148*54mm

Working Environment

Operating temperature:-40to75℃;Storage temperature:-40℃to75℃;Operating humidity:10% to 90% , relative, non-condensing

Warranty

5 years warranty

  • Download FileName:E-link LNK-GYM4012GP-SFP Industrial Managed 12GE + 4x10G SFP+ PoE Switch Datasheet V1.0.pdf Size: 2.62MB

Ordering Information

Model

Description

LNK-GYM408GXP-SFP

L2+ 8-Port 10/100/1000T 802.3at PoE + 1-Port 10/100/1000T Console + 4-Port 10G(support 1.25/2.5/5G)SFP Managed Switch

SFP Options

► SFP option. Please select your SFP on our SFP Options Page (Industrial SFP).

► SFP module is to be purchased separately.

Mounting Options

► Default DIN-Rail Bracket installed, Wall Mount Bracket is included.

Power Options

► 240W/5A 48VDC DIN-Rail Power Supply. Open Wire for Terminal Block.

► Power Supply is to be purchased separately.

PoE Injector
PoE Switch
PoE Media Converte
Call Now
Industrial PoE Injector
Contact
Supplier
Industrial PoE Switch
Chat Now
E-link PoE Switchs