中文版
中文版
 English
English
Location:Products > Networking > Commercial Ethernet > PoE Switch
Networking
SFP Transceiver
Video Transmission
Other Accessories

Managed 8-port 10/100/1000BASE-T PoE + 2-Port SFP Ethernet Switch

Model:LNK-M1082GP

►All Gigabit design,8x gigabit Ethernet RJ45 ports with AutoUplink™, 1x console port, and 2x gigabit SFP slots.

►8 PoE ports support power over Ethernet for PDs

►Meet IEEE 802.3af/at PoE standard. Supports per port PoE configuration function


Overview

LNK-M1082GP series managed PoE switch comes with 8x 10/100/1000Base-T RJ45 Ethernet ports, 1x console port, and 2x Gigabit SFP slots. It can supply power to network equipment such as weather-proof IP cameras with windshield wiper and heater, high-performance AP and IP telephone. This managed PoE switch are highly flexible, the transmission distance of the SFP fiber port can be up to 120km, and with high resistance to electromagnetic interference.LNK-M1082GP series product components were rigorous screened, have superior performance in stability, environmental adaptability. Metal shells have better resistance ability to corrosion and electromagnetic interference, ensure stability and security of this Ethernet Switch. Power input also chooses a suitable and reliable types of power, to get more powerful suitability to environment.

Features

►All Gigabit design,8x gigabit Ethernet RJ45 ports with AutoUplink™, 1x console port, and 2x gigabit SFP slots.

►8 PoE ports support power over Ethernet for PDs

►Meet IEEE 802.3af/at PoE standard. Supports per port PoE configuration function

►L2+ features provide better manageability, security,QoS, and performance.  

►Support L2+ Switching features including 802.1QVLAN, Mirroring, Port isolation, IGMP Snooping, DHCP Snooping, LLDP, POE+ management, IP Source Guard, ARP inspection, ACLs etc.

►Support spanning tree STP(802.1D) and RSTP(802.1W).

►Jumbo frames support up to 9.6K kilobtyes.

►Support enhanced management through WEB, CLI, TELNET, SSH, SNMP.

►Support cable diagnosis

►G.8032, support <50ms industrial quick ring protection

Application

Technical Specification

Product Name

8-Port 10/100/1000Base-T + 2x Gigabit SFP slots Managed POE Switch

Product Model

LNK-M1082GP Series

Connector Type

8x 10/100/1000Base-T ports +2xGigabitSFP slots + 1 Console port

Network Media

10BASE-T: Cat3/ 4/ 5 UTP (≤100m)

100BASE-TX: Cat5 or more UTP (≤100m)

1000BASE-TX: Cat5 or more UTP (≤100m)

Buffer Memory

4M

Packet Forwarding Rate

14.88M

pps

Bandwidth

192Gbps

Layer 2Switching 

Spanning Tree Protocol (STP)

Standard Spanning Tree 802.1d

Rapid Spanning Tree (RSTP) 802.1w

G.8032 ERPS

<50ms ring protection for industrial high reliable application

Aggregation

Link Aggregation Control Protocol (LACP) IEEE 802.3ad

Up to13 groups

Up to 16 ports per group

VLAN

Support up to4K VLANs simultaneously (out of 4096 VLAN IDs)

Port-based VLAN

802.1Q tag-based VLAN

DHCP Snooping  (Layer 2)

Prevent unauthorized configuration and use of IP addresses, while providing support for IP Source Guard and ARP detection

IGMP v1/v2 snooping

IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 1024 multicast groups (source-specific multicasting isnot supported)

Security

 

Secure Shell (SSH) Protocol

SSH secures Telnet traffic in or out the switch, SSH v1 and v2 are supported

Secure Sockets Layer (SSL),HTTPS

SSLencrypts the http traffic, allowing advance secure access to the browser-based management GUI in the switch

Port Security

Locks MAC Addresses to ports, and limits the number of learned MAC addresses

IP Source Guard

Prevents datagram with spoofed addresses from being in the network

Storm control

Prevents traffic on a LAN from being disrupted by a broadcast, multicast, or unicast storm on a port

ACLs

Support for up to256 entries;Drop or rate limitation based on source and destination MAC, VLAN ID or IP address, protocol, port, differentiated services code point (DSCP) / IP precedence, TCP/ UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag

Quality of Service

Hardware

Support8hardware queues

Scheduling

8 COS queues per port supportstrict priority and weighted round-robin (WRR)

Classification

Port based; 802.1p(PCP) VLAN priority based;

Rate Limiting

Ingress policer;egress shaping and rate control;per VLAN,per port and flow based

Management       (Web/ SSL, Telnet/ SSH, ping, Trivial File Transfer Protocol (TFTP), SNMP, Syslog)

Web GUI interface

Built-in switch configuration utility for browser-based device configuration (HTTP/ HTTPs). Supports configuration, system dashboard, maintenance, and monitoring

Dual Image

Dual image provides independent primary and secondary OS files for backup while upgrading

Firmware upgrade

Web browser upgrade (HTTP/ HTTPs) and TFTP;nUpgrade through console port as well

Port mirroring

Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up toN-1 (N is Switch’s Ports)ports can be mirrored to single destination port. A single session is supported.  

Other management

Single IP management; HTTP/HTTPs; SSH; RADIUS; DHCP Client; SNTP; cable diagnostics; ping; syslog; Telnet client (SSH secure support)

Green Ethernet

Link detection

Compliant IEEE802.3az Energy Efficient Ethernet Task Force. Automatically turns off power on

Gigabit Ethernet RJ-45 port when detecting link down or Idle of client. Active mode is resumed without loss of any packets when the switch detects the link up

Cable length detection

Adjusts the signal strength based on the cable length. Reduces the power consumption for cables shorter.

General

Jumbo frames

Frame sizes up to 9KB supported on Gigabit interfaces

MAC Table

Up to8K MAC addresses.

Discovery

Link Layer Discovery Protocol (LLDP)

Used by network devices for advertising their identities, capabilities, and neighbors on a IEEE 802 local area network, principally wired Ethernet.  

PoE

 

PoE Standard:

PoE Port Power:30W perPoE port by default, can be customized by Web management software

PoE Ports:

PoE Ports: End-span (Mid-span optional)

Minimum Requirements

Web browser: Mozilla Firefox version 2.5 or later, Microsoft Internet Explorer version 6 or later;

Category 5 Ethernet network cable;

TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed on each computer in network

Dimensions

279*210*44mm

Working Environment

Operating temperature:-20 to55 ℃;

Storage temperature:-40℃to 85 ℃;

Operating humidity: 10% to 90% , relative, non-condensing

Warranty

2 years warranty

  • Download FileName:E-link LNK-M1082GP PoE Switch Datasheet V1.0.pdf Size: 387KB

Order information

Model

Description

LNK-M1082GPF 

Managed 8G + 2SFP Ethernet PoE Switch: 10/100/1000Mbps POE port (8 ports) +1000Mbps SFP (the 9,10th) + 1 console port, not including SFP Modules; Support IEEE 802.3af Standard(15.4W) and IEEE 802.3at Standard(30W), Built-in Power Supply AC220V 130W, support WEB Management

LNK-M1082GPT 

Managed 8G + 2SFP Ethernet PoE Switch: 10/100/1000Mbps POE port (8 ports) +1000Mbps SFP (the 9,10th) + 1 console port, not including SFP Modules; Support IEEE 802.3af Standard(15.4W) and IEEE 802.3at Standard(30W), Built-in Power Supply AC220V 240W, support WEB Management

PoE Injector
PoE Switch
PoE Media Converte
Call Now
Industrial PoE Injector
Contact
Supplier
Industrial PoE Switch
Chat Now
E-link PoE Switchs