中文版
中文版
 English
English
Location:Products > Networking > Commercial Ethernet > Fiber Optic Switch
Networking
SFP Transceiver
Video Transmission
Other Accessories

L3 Managed 24-Port Gigabit SFP + 6-Port Combo + 2-Port 10G SFP Fiber Switch

Model:LNK-FS2462

► Support for 802.1x authentication, and to provide users with access to authentication.

► Support the function of port mirroring, port gathering, port speed limit.

► Support the port-based VLAN and IEEE802.1Q based on VLAN.

Overview

LNK-FS2462 Series 24-Port SFP Fiber Switch are standard layer3 non-blocking switch, based on high-performance ASIC chip technology, the modular structure design, which have a capability of multilayer switching and wire-speed routing forwarding. Can be deployed in the metropolitan area network, and provides a few last 1 km technology to gather and core data exchange. At the same time,FS2462 Series Switches provide a complete IPv4/IPv6 routing, including tunnel and IP multicast. The user can set all kinds of functions of switch through the Web, SNMP and so on.FS2462 Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.

Features

► ARP defense: the function of MAC address and port binding and MAC address security filtering can effectively defense the ARP attack; DHCP snooping can provide ARP protection for users to obtain the MAC dynamically.

► Qos: support for multiple QOS strategy. Based on the 802.1p priority setting, each port provides eight priority queues. IP-DSCP can be divided into different service levels according to the IP header , to achieve a comprehensive QOS. AUTO VOIP can set the port to the highest priority of the voice signal, improve the voice quality of network IP telephone greatly.

► Spanning Tree: Support the standard of IEEE 802.1d and IEEE 802.1w (Rapid Spanning Tree Protocol) and IEEE802.1s (Multiple Spanning Tree Protocol).

► AUTO DOS: defense the following DOS attack with seven different forms.

► Storm suppression: can be set with the Broadcast, multicast, DLF traffic.

► ACL Access Control: used to control the exchange of the packet from the port, to ensure that the intranet site will not be access to users without authority, while indirectly defend ARP attack.

► IGMP Snooping: Support IGMP version 2 (RFC 2236): IGMP Snooping is used to establish the multicast groups to forward multicast packets to avoid wasting bandwidth when a multicast packet overflow network.

► Support for 802.1x authentication, and to provide users with access to authentication.

► Wire-speed filtering - Storage - forward mode, providing a true non-blocking switching structure.

► Support the function of port mirroring, port gathering, port speed limit.

► Support the port-based VLAN and IEEE802.1Q based on VLAN .

Application

The user can set all kinds of functions of switch through the Web, SNMP and so on. FS2462 Series Switches support DOS defense, Qos, RSTP, MSTP, VLAN, Port Security, a storm suppression, ACL access control and other functions, which is very suitable for the aggregation application of large-scale network and the core application of medium and small-sized network.

Technical Indexes

Product Type

Managed 24-Port Gigabit SFP Fiber Switch

Fixed port

24-Port Gigabit SFP Fiber Port + 6-Port Combo Ports+2*10G Extensible (Optional)

Backplane bandwidth

88Gbps

Packet forwarding rate

65.472Mpps

Processor

RISC 400MHz

Flash memory capacity

8MB

The memory capacity

128MB

Address table

32K

Product characteristics

Spanning tree

Support STP, RSTP, MSTP

VLAN

Support port-based VLAN

Support 802.1Q labeled VLAN

Support for Private Vlan

Flow control

Based on a standard IEEE 802.3x flow control

Using IEEE 802.1Qbb priority flow control

Broadcast control

Restraining broadcast storm, stop sending so long as reaching a critical point

multicast control

IGMP Snooping multicast message automatic monitoring

Port binding

Each group of a maximum of 8, while support 32 group
LACP dynamic or static polymerization

Port mirroring

Support based on flow classification mirroring and port mirroring

Characteristics of DHCP

DHCP Snooping

Safety characteristics

Port Security (Port Security) function

Hardware support for IP ACL, MAC ACL, Vlan ACL
Hardware support for port based user IP+MAC+Vlan ID+ user account a variety of factors combined to bind
Support IP Source Guard
Support WEB interface user authentication

User classification management and password protection                                   
Safety control technology
Policy control list

Quality of service

IEEE 802.1Qau congestion mechanism
Each port 8 send queue mapping 802.1p 8 priority
DRR, WRR, SP and FIFO queue scheduling algorithm
Best-Effort Service
Differentiated Service
Strict Priority
Weighted Round Robin
First come first served
TOS to mark
RTS

Network management

SNMP v1/v2
Telnet
WEB interface
Support the fan, temperature, system log, hierarchical alarm

Physical characteristics

Appearance size

442mm × 285mm × 44mm

Power characteristic

AC 110-240V adaptive, 47-63Hz, 1A/230V, RPS power hot backup

Power

80W

Indicator lamp

Power indicator, indication of system, connecting / transceiver instructions

Environment humidity / temperature

0-50℃ operation,-40-70℃ preservation,0-90% no condensation

  • Download FileName:E-link LNK-FS2462 Series Fiber Switch Datasheet V2.0.pdf Size: 262KB

Ordering Information

Item

Description

LNK-FS246

L3 Managed Switch: 24-Port Gigabit SFP + 6-Port Combo Ethernet Port without 2*10G SFP Port

LNK-FS2462

L3 Managed Ethernet Switch: 24-Port Gigabit SFP + 6-Port Combo Ethernet Port + 2*10G SFP Port

PoE Injector
PoE Switch
PoE Media Converte
Call Now
Industrial PoE Injector
Contact
Supplier
Industrial PoE Switch
Chat Now
E-link PoE Switchs